Microwave Repair in San Francisco
Diagnosis and repair for Kenmore countertop, over-the-range and built-in microwaves across San Francisco and the Bay Area, with a written estimate first.
Model Reference
Kenmore 22-83383 Over-the-Range Microwave Repair in San Francisco
An over-the-range convection microwave listed at 1.8 cu. ft., serviced in San Francisco and the Bay Area.
Kenmore repair checklist · San Francisco Bay Area
- 10 appliance guides
- 59 model pages
- 268 error codes explained
- 150 Bay Area places
- Mon–Sat 8:00 AM – 7:00 PM
Model number
22-83383
About this model
Model overview
The Kenmore 22-83383 is an over-the-range microwave with convection, listed at 1.8 cu. ft. in the current Kenmore lineup. It does two jobs in one housing: it cooks, and it sits under the cabinet above your range where it also handles steam and smoke. That position drives most of what we see, and it is covered on our Kenmore microwave repair page.
Cooking-side problems
A microwave that runs but leaves food cold is the top complaint. On this type of unit that can involve the magnetron circuit, the high-voltage diode, or the door switches that decide whether the cavity may operate. Because a microwave stores energy even when unplugged, none of this is a do-it-yourself repair. Our guide to Kenmore microwave not heating lists safe things to try first.
The convection side adds its own questions. If the oven function shows a message or never heats, the problem is likely in the convection heater or its fan rather than the microwave circuit. We test each system separately and you approve the estimate before any work starts.
Venting and lighting
- Fan runs weakly or not at all.
- Cooktop lights stay dark.
- Grease filters clogged and dripping.
- Fan runs on its own because of a stuck switch.
- Odd smells when the fan starts.
Grease filters can be removed and washed by hand and the lamp area wiped when cool; that is as far as owners should go. The fan motor and ductwork need a technician. The Kenmore range hood fan not working page covers the hood-fan side in more detail.
Mounting and ducting
An over-the-range microwave hangs from a bracket and a cabinet above, with a power cord reaching a receptacle in the cabinet. It may vent outside or recirculate through a filter, depending on how it was installed. Tell us which you have, and whether stairs or a high ceiling will complicate access.
Before you call
Press Start again after closing the door firmly, check the breaker, and write down any message on the display. Gather 22-83383 and the serial number from the label; how to find your Kenmore model number can help. Compare with the plain over-the-range Kenmore 22-87062, and see all Kenmore microwaves. If any part smells burnt, stop using it and switch the breaker off.
Frequently asked questions
It is listed as an over-the-range convection microwave at 1.8 cu. ft. from the current Kenmore lineup.
No. The parts involved hold energy, so leave that to a technician. Check the breaker and door closing, then book a visit.
A stuck switch or a heat-triggered control can start it. A technician can confirm which.
Usually yes, but we may need clear space below the unit and access to the receptacle above.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Fix it right
Repair service
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 825-6393
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California