Kenmore 2014 Self-Cleaning Electric Range nCAL Error Code
nCAL on a Kenmore 2014 self-cleaning range: electronic oven control board failure, and the part the manual lists.
Specialized Kenmore Appliance Repair in San Francisco
Mon–Sat: 8:00 AM – 7:00 PM
A 4.8 cu. ft. gas range from the current Kenmore lineup, serviced across San Francisco and the Bay Area.
Kenmore repair checklist · San Francisco Bay Area
The Kenmore 22-75293 is a gas range from the current Kenmore lineup, listed with a 4.8 cu. ft. oven. In San Francisco it tends to turn up in galley kitchens and older flats where the range sits close to cabinets on both sides, which shapes how a technician reaches it. Below is what usually goes wrong with a gas range of this type, what you can look at yourself, and how a visit works. For the wider picture, see our Kenmore range repair page and the Kenmore ranges guide.
Gas ranges show trouble in two places. On the cooktop, owners describe a burner that clicks but never catches, a flame that is uneven or yellow-tipped, or a burner that lights and then drops out. Those point a technician toward the igniter, the burner cap and ports, or the spark module rather than to any single part.
In the oven, the common reports are no heat at all, heat that arrives late, or a temperature that wanders. A gas oven relies on an igniter to open the gas valve, so a weak igniter can leave the oven cold even though everything looks normal. A temperature sensor or a worn door seal can produce similar complaints, which is why the symptom alone never settles the diagnosis.
If you smell gas, leave the home, avoid switches, and call the gas utility or 911 from outside. If you notice burning smells or sparks, switch the range off at the breaker and stop using it.
Gas ranges stand on a flexible connector fed from a shutoff valve, and they are secured by an anti-tip bracket at the floor or wall. In tight San Francisco kitchens the range can only be pulled out a short way, so we ask you to clear the area in front and note any floor that was recently replaced.
Parts for a range are matched to the exact label, so a note that says only “Kenmore gas range” is not enough. The label is usually on the frame near the oven door or inside the storage drawer area. Here is how to find your Kenmore model number if you need a hand locating it. Note the serial number too.
If a burner will not light, our guide to a Kenmore range burner won’t light walks through the same checks in more detail, and Kenmore oven not heating covers oven-side symptoms. Another 4.8 cu. ft. option in the lineup is the electric Kenmore 22-95163. We diagnose first, give you a written estimate, and repair nothing until you approve it.
It appears in the current Kenmore lineup. Even so, many Kenmore ranges in Bay Area homes are older units, so the model label matters when ordering parts.
Not necessarily. Clogged burner ports or a misseated cap are common causes, and cleaning them once the surface is cool is a safe first step. If clicking continues without flame, book a diagnosis.
The ignition system needs household power, so a tripped breaker or unplugged cord can stop burners from sparking. Check those first, then call if the problem remains.
Yes. We work in flats, condos and houses across San Francisco and the Bay Area; just tell us about parking and building access when you request a visit.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.