Kenmore Dishwasher AE Error Code
AE (E1 on some units) reports a water leak: water in the cabinet base trips the flood switch, or a low tub level speeds the pump.
Specialized Kenmore Appliance Repair in San Francisco
Mon–Sat: 8:00 AM – 7:00 PM
A 24-inch built-in tucked under a San Francisco countertop leaves little room for guesswork, so we start with the connections you can see.
Kenmore repair checklist · San Francisco Bay Area
The 22-14582 is a white, 24-inch Kenmore built-in dishwasher from the UltraWash and SmartWash line, and a current model. That is the extent of what we say about its features; anything else we confirm against the machine itself.
Each symptom splits into several possible causes, and a built-in has more of them than a freestanding machine because the drain, the supply and the electrical feed all pass through the cabinet.
Narrow galley kitchens and older flats often have a drain hose routed through a tight cutout, shared with a disposer or air gap. A hose kinked behind the unit, a disposer knockout plug that was never removed, or a clogged air gap can imitate a failed pump. We look at the loop and the connection before pulling the machine out.
Please do not slide the dishwasher out yourself; the supply line and power connection sit directly behind it.
If a letter or number shows, look at the meaning on the matching code page, for example OE for not draining or IE for not filling, and mention it when you book.
See the guide to a dishwasher that is not draining, our Kenmore dishwasher repair page and the overview of Kenmore dishwashers.
Parts for a built-in dishwasher are matched to the exact number, and similar-looking machines use different filters, spray arms and pumps. The 22-14582 label gives us what we need to order correctly. When you book, a photo of that label and a short description of what happens during a cycle is enough, and we handle the rest during the visit, including a written estimate before anything is repaired.
The record lists it as a current model. Your own unit may be older, so we go by the label on the door frame.
Usually on the inside edge of the door or along the tub frame. Open the door fully and look around the rim.
A blocked filter, a kinked hose, a disposer plug or a pump fault can all do it. We tell them apart during the visit.
No, leave that to us. We handle it safely and reconnect it.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.