Kenmore Dishwasher AE Error Code
AE (E1 on some units) reports a water leak: water in the cabinet base trips the flood switch, or a low tub level speeds the pump.
Model Reference
Kenmore Elite 630.14003 Dishwasher: Noise, Pump and Repair
A new noise from a dishwasher usually means something is loose, jammed or wearing. Listen first, then tell us what you heard.
Kenmore repair checklist · San Francisco Bay Area
- 10 appliance guides
- 59 model pages
- 268 error codes explained
- 150 Bay Area places
- Mon–Sat 8:00 AM – 7:00 PM
Model number
630.14003
About this model
Model overview
Model 630.14003 is a Kenmore Elite dishwasher, sold from January 2009 until May 2014 and no longer sold new. After many years of service, the moving parts in the sump deserve attention whenever the sound changes.
Different noises, different meanings
- A rattle often means a spray arm or a utensil hitting something.
- A hum without water movement can point to a stalled motor.
- Grinding at the start of drain suggests debris in the drain pump.
- A whine during wash may come from the circulation pump.
Motor and communication codes
Some Kenmore dishwashers show LE for a locked circulation pump motor, and the two-part codes F4E1 and F4E4 describe lost communication between the control board and that motor. A technician tests the motor and wiring before deciding which part needs work.
Diverter and spray
A diverter sends water to the upper or lower arm. If it sticks, one level cleans well and the other stays dirty. The meanings F9E2 and F9E3 relate to diverter faults on some models.
Safe steps at home
- Stop the cycle and open the door.
- Remove the lower rack and look for a glass chip, olive pit or label.
- Lift out the filter and rinse it.
- Spin each spray arm gently by hand.
- Run a short cycle and listen.
Never reach into the sump with bare hands or remove panels.
Related pages
Visit Kenmore dishwasher repair, browse Kenmore dishwashers, or read about a dishwasher error code. A sibling model is 630.13003.
Why the full model number matters
Pump and motor assemblies in this Elite range are matched to the model, so a guess can mean the wrong part. Provide 630.14003 in full, along with a description or even a short phone recording of the sound.
The visit includes a listen through the cycle, a test of the suspected parts, a clear explanation and a written estimate. Nothing is repaired until you approve it.
Recording the sound
A short phone video of the noise, taken near the door while the cycle runs, often tells us more than a verbal description. Note when it starts, such as at fill, at wash or during drain, and whether it changes pitch.
Frequently asked questions
Grinding can damage the pump further. Stop the cycle and clear visible debris, then book if the sound returns.
Yes, it is a Kenmore Elite model.
That depends on the diagnosis. We confirm the faulty part first and quote it in writing.
Yes. It was sold from January 2009 to May 2014 and is no longer sold new.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Diagnostics
Error codes for this appliance
Fix it right
Repair service
Dishwasher Repair in San Francisco
Standing water, dirty dishes, leaks and no-start problems on Kenmore dishwashers, checked from the drain path and the door latch through to…
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 825-6393
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California