Kenmore 2014 Self-Cleaning Electric Range nCAL Error Code
nCAL on a Kenmore 2014 self-cleaning range: electronic oven control board failure, and the part the manual lists.
Specialized Kenmore Appliance Repair in San Francisco
Mon–Sat: 8:00 AM – 7:00 PM
A 5.6 cu. ft. electric range from the current Kenmore lineup; diagnosis comes before any repair.
Kenmore repair checklist · San Francisco Bay Area
This is an electric range from the current Kenmore lineup, with a listed oven size of 5.6 cu. ft. Everything it does depends on the home’s electrical supply, from the cooktop to the oven and the control panel.
Our visits to electric ranges fall into three groups. First, heat problems: the bake element or broil element stops glowing, or the oven runs well off the set temperature. Second, control problems: the touch panel does not respond, shows a code, or beeps on its own. Third, door-related faults: the latch or gasket prevents the oven from closing and heating normally.
If the display shows a code, write it down exactly. Our Kenmore oven error codes guide collects meanings we have verified, and the Kenmore oven temperature off article explains why an oven can run hot or cool even when the element looks fine.
Do not unscrew the back panel or poke at terminals. If an element has visible blisters or a burning smell appears, switch the range off at the breaker.
An electric range of this size needs a dedicated circuit, level feet and a secured anti-tip bracket. In older San Francisco buildings, a circuit that was sized for a smaller range can contribute to nuisance trips; we note what we see and report it with the written estimate rather than guess.
Have the model number 22-96833 ready, plus the serial number from the label. If you are unsure where to look, see how to find your Kenmore model number. Related pages include Kenmore range repair, the sister electric Kenmore 22-95163, and the gas Kenmore 22-76843 of the same listed size, plus all Kenmore ranges. You approve the estimate before we start.
It is an electric range with a 5.6 cu. ft. oven from the current Kenmore lineup.
Write the code down and compare it with our oven error code guide. A technician can then confirm the cause on your range.
Causes range from a failing element or sensor to a door that does not seal. We diagnose before suggesting a repair.
Yes, but let us know about clearances so we can plan how to slide the range out safely.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.