Kenmore Cooktop 35 Error Code

Code 35 is a supply problem first and a board problem only after that. The cooktop is reporting that the voltage reaching it is low, or that wiring connections have failed.

How the listed checks run

1. Disconnect power to the cooktop.
2. Look over the power supply wiring.
3. Ask an electrician to check the supply voltage.
4. If the connections are fine and the voltage reads normal, the defective part is the main power control board or the filter control board.

Why the order matters

The two boards come into the picture only once the wiring and the voltage have been cleared, so the supply side is looked at before any parts are ordered.

Model coverage

This entry belongs to induction cooktops from Kenmore whose model numbers open with 790 and whose codes are all numeric.

Nearby codes

• Code 30 is the high-voltage side: improper supply or internal wiring failure.
• Code 34 reports the filter and main power boards failing to communicate.
• Code 32 reports low output from the filter board 12-volt supply.

Booking Kenmore cooktop service in San Francisco

For a cooktop in San Francisco or anywhere in the Bay Area that keeps showing 35, start at Kenmore cooktop repair or call (415) 825-6393. Tell the dispatcher the code, the model number and whether an electrician has already looked at the supply.

Improper power supply voltage (low) or failed wiring connections.