Kenmore Cooktop 30 Error Code

Meaning of 30

Two things can trigger 30: voltage arriving at the cooktop that is too high, or a wiring failure inside it. It sits in the list for Kenmore induction models numbered from 790, which show digits without a letter.

What the manual has you do

1. Disconnect power.
2. Inspect the power supply wiring.
3. Ask an electrician to measure the supply voltage.

If the wiring is sound and the voltage reads normal, the defect lies in either the main power control board or the filter control board. A technician replaces whichever board it is, while the owner’s part ends with the wiring look and the electrician’s measurement.

Board and voltage codes

• Code 31: a power level failure
• Code 35: low supply voltage or failed wiring connections, the opposite voltage problem
• Code 33: improper voltage output from the filter control board

Induction cooktop service in San Francisco

Once the supply checks are done, a technician can look at the boards. Call (415) 825-6393 for Kenmore cooktop repair in San Francisco and the Bay Area, and have the 30 code, the model number and the results of the wiring and voltage checks ready.

Code 30 means improper high supply voltage or internal wiring failure.